AT-GS900/8POE Gigabit Ethernet Switch Installation Guide
45
2. Connect the fiber optic cable to the SFP transceiver, as shown in
Figure 13.
Figure 13. Connecting Fiber Optic Cables to the SFP Transceiver
3. Power on the end nodes.
Powering on the
Switch
To power on the AT-GS900/8POE Gigabit Ethernet switch, perform the
following procedure:
1. Plug the power cord into the AC power connector on the back panel of
the switch, as shown in Figure 14.
Figure 14. Connecting the AC Power Cord
2. Plug the other end of the power cord into a wall outlet.
3. Verify that the PWR LED is green.
7
8
R
S
FP
CLASS
1
LASER
PROD
UCT
1000Ba
s
e-X
PD ON
PD ERR
OR
1000 LINK
ACT
10/100 LINK
ACT
PORT
AC
TIV
ITY
971
8
S
FP
100-240V
A
C
~
780
Warning:
Power cord is used as a disconnection device. To de-
energize equipment, disconnect the power cord.
E3
Pluggable Equipment. The socket outlet shall be installed near
the equipment and shall be easily accessible.
E5
