
FS970M Series Installation Guide
55
Warning
Class I Equipment. This equipment must be earthed. The power
plug must be connected to a properly wired earth ground socket
outlet. An improperly wired socket outlet could place hazardous
voltages on accessible metal parts.
E4
Note
Pluggable Equipment. The socket outlet shall be installed near the
equipment and shall be easily accessible.
E5
Caution
Air vents must not be blocked and must have free access to the
room ambient air for cooling.
E6
Warning
Operating Temperatures. All the switches are designed for a
maximum ambient temperature of 40° degrees C, except the
AT-FS970M/8PS-E Switch, which has a maximum ambient
temperature of 50° degrees C.
Note
All Countries: Install product in accordance with local and National
Electrical Codes.
E8
Warning
Only trained and qualified personnel are allowed to install or replace
this equipment.
E14
Caution
Circuit Overloading: Consideration should be given to the
connection of the equipment to the supply circuit and the effect that
overloading of circuits might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment nameplate
ratings should be used when addressing this concern.
E21
Summary of Contents for AT-FS970M/16F8-LC
