Installation
18
2. Attach the rackmounting brackets to each side of the switch using the
screws provided. See Figure 10.
Figure 10
Attaching the Rackmounting Brackets to the Switch
3. Secure the switch to the rack using two screws (not provided) for each side,
as shown in Figure 11.
Figure 11
Installing the Switch to the Rack
4. Apply power to the switch by plugging the AC power cord into an AC power
outlet; then plug the other end of the power cord into the receptacle located
on the back of the switch.
5. Verify that the POWER LED is green. If the LED is OFF, refer to
“Troubleshooting” on page 21.
Summary of Contents for AT-FS7016
Page 1: ...AT FS7016 AT FS7024 Fast Ethernet Smart Switches Installation Guide PN 613 50469 00 Rev A...
Page 10: ......
Page 30: ......
Page 36: ......
