Chapter 2
18
2.13 BOOTP Download Procedure
NOTES:
•
These are generic directions for successfully updating the Firmware on to
the ADSL device via BOOTP.
•
There are many Firmware versions. Please contact Customer Service
before beginning the download for additional information.
•
Connect the ADSL device’s Ethernet port with the provided Ethernet
cable to the PC’s NIC card.
2.13.1
Launching the Firmware Upgrade Utility
NOTE: The MAC address of the ADSL device is required before beginning
the download procedure. If the MAC address is not known, follow the
steps as shown below:
= Start a DOS application and type in the following command:
telnet <IP>
<IP> is the IP address of the ADSL device.
password: ********
logged on; type ‘@close’ to close connection.
10.0.0.1> chips info
ADSL USB Modem - ADSL device version 1.35 (Dec. 13 2000)
Machine Name:
MAC address: 0:e0:b2:0:0:0
= Enter the Administrator’s password (default is password).
= Type in the following command:
10.0.0.1>chips info
= The MAC address will be shown on the screen.
