manualshive.com logo in svg

Allied Telesis AT-AR221E, Installation Manual, Page: 20 / 70

Share
Download
Allied Telesis AT-AR221E Installation Manual Download Page 20

Chapter 2

Installation

Installing the Hardware

Perform the following procedures to install the router.

Reviewing Safety Precautions

Please review the following safety precautions before you begin to install the device in your network. Refer to Appendix
B for translated safety statements in your language.

Warning

Lightning Danger

: Do not work on this equipment or cables during periods of lightning activity.

1

Warning

Power cord is used as a disconnection device:To de-energize equipment, disconnect the 
power cord.

2

Warning

Electrical-Type Class 1 Equipment:This equipment must be earthed.The power plug must be 
connected to a properly wired earth ground socket outlet.An improperly wired socket outlet could
place hazardous voltages on accessible metal parts.

3

Caution

Pluggable Equipment:The socket outlet should be installed near the equipment and should be 
easily accessible.

4

Caution

Air vents:The air vents must not be blocked on the unit and must have free access to the room 
ambient air for cooling.

5

Caution

Operating Temperature:This product is designed for a maximum ambient temperature of 40°C.

6

Caution

All Countries: Install this product in accordance with local and National Electric Codes.

7

18

Summary of Contents for AT-AR221E







































































Reviews:

No comments