Allied Telesis AT-ANC10S, Installation And User Manual

Page: 84 / 124

Chapter 8: Installing Management Applications
84
Installing Broadcom Advanced Control Suite 4 and Related
Management Applications
The Broadcom Advanced Control Suite 4 (BACS 4) software and related
management applications can be installed from the source-file directory or
by using the silent install option. See the following:
 “Checking .NET Framework Requirements” on page 84
 “Using the Installer” on page 85
 “Using the Silent Install Option” on page 85
After you use the source-file directory or the silent install option, the
following features are installed on your system:

Control Suite - Broadcom Advanced Control Suite 4 (BACS 4).

BASP - Installs Broadcom Advanced Server Program.

SNMP - Installs the Simple Network Management Protocol
subagent.
 CIM Provider - Installs the Common Information Model provider.
Note
Ensure that the Broadcom network adapter(s) is physically installed
in the system before installing BACS 4.
Note
Before installing Broadcom Advance Control Suite 4, verify that
.NET Framework is up to date.
Note
Before you begin the installation, close all applications, windows, or
dialog boxes.
Checking .NET
Framework
Requirements
Before you use either the source-file directory or the silent install option,
you must make sure that your system meets the minimum installation
requirements.
Microsoft .NET Framework includes the runtime and associated files
needed to run BACS 4, and must be installed on your system in order for
BACS 4 to operate. Please be sure the .NET Framwwork version for your
operating system is up to date.