Allied Telesis AT-ANC10S, Installation And User Manual

Page: 65 / 124

AT-ANC10S/2 Adapter Installation and User’s Guide
65
Modifying the Advanced Properties
After you have installed the driver software, you can use Table 8 to verify
or change the adapter properties:
Note
After you upgrade the driver software, the Advanced Properties may
change.
Note
The configuration steps in the table may differ slightly if the “Classic
Start Menu” is set on your computer.
Table 8. Advanced Features in Microsoft Windows
Feature Description Configuration Steps
Encapsulated Task
Offload Allows for task offload capabilities
when using Hyper-V Virtualized
Network (HVN) functions 1. In Microsoft Windows,
right-click the Network Adapter
in Network Connections and,
then click Properties.
2. Click the Configure button and
then the Advanced tab.
3. Set the desired Encapsulated
Task Offload value.
Flow Control Enables or disables the receipt or
transmission of PAUSE frames.
PAUSE frames allow the network
adapter and a switch to control the
transmit rate. The side that is
receiving the PAUSE frame
momentarily stops transmitting. 1. In Microsoft Windows,
right-click the Network Adapter
in Network Connections and
then click Properties.
2. Click the Configure button and
then the Advanced tab.
3. Set the desired Flow Control
value.