Allied Telesis AT-ANC10S, Installation And User Manual

Page: 32 / 124

Chapter 2: Installing the Hardware
32
4. Remove the network adapter card from the shipping package and
store the packaging material in a safe location.
5. Applying even pressure at both corners of the card, push the adapter
card until it is firmly seated in the appropriate PCIe slot. Refer to
Figure 8. Make sure the card is securely seated.
Figure 8. Inserting the Adapter with a High-profile Bracket
Caution
Do not use excessive force when seating the card, because this
may damage the system or adapter. If the card resists seating,
remove it from the system, realign it, and try again.

E47
6. Secure the network adapter card to the chassis with a Phillips-head
screw (not provided). See Figure 9 on page 33.