40
x900 Series Switch and SwitchBlade
®
x908
C613-03092-00 REV J
Verifying installation
To confirm that the network processor accelerator card is installed and
operating correctly, check that the switch has recognised it. Turn on the switch
and enter the show system command to display system information. The
following figure is an example of output from the show system command for
the AT-8948 model.
The first section of the output shows information about boards installed in the
switch. There are details about the switch base card, the accelerator card if
installed, and the type of power supply unit or fan-only module. Both the part
names and serial numbers of the base card and accelerator card are displayed.
Record the details of the base card and the network processor accelerator card
for later reference. If you have questions or problems with the network
Switch System Status Time 14:50:14 Date 18-Apr-2007
Board ID Bay Board Name Host Id Rev Serial number
------------------------------------------------------------
Base 201 AT-8948 0 P4-3 58823566
Accel 214 AT-ACC01 0 M1-1 61101175
PSU 212 1 AT-PWR01-AC 0 P3-0 58494001
------------------------------------------------------------
Memory - DRAM :131072 kB FLASH : 32768 kB
------------------------------------------------------------
SysDescription
Allied Telesis AT-8948 version 2.8.1-06 30-Jan-2007
SysContact
SysLocation
SysName
SysDistName
SysUpTime
26588 ( 00:04:25 )
Boot Image : 89_120.fbr size 1038496 30-May-2006
Software Version: 2.8.1-06 30-Jan-2007
Release Version : 2.8.1-00 23-Jun-2006
Patch Installed : NONE
Territory : europe
Country : none
Help File : help.hlp
PSU1: (AC) Fan: Normal Temp: Normal Power: Normal
Current temperature : Normal
Current accelerator card temperature: Normal
FAN
-----------------
Main fan Normal
Accelerator fan 1 Normal
Accelerator fan 2 Normal
-----------------
Configuration
Boot configuration file: flash:boot.cfg (exists)
Current configuration: flash:boot.cfg
Security Mode : Disabled
