Installation Guide
5
XFP Port
The single-port 10Gigabit Ethernet expansion module, model AT-A60, features
the following:
■
support for hot-swappable XFP modules
■
two 16MByte DDR-SDRAM for packet buffering
■
compatibility with a number of different 10 Gb XFP serial transceivers
■
status LEDs
■
XFP connector, cage, and heatsink are provided for use with any standard
XFP module
Front view AT-A60
The following LEDs report operations on AT-A60 expansion modules.
LED
State
Description
L/A
(Link Activity)
Green
An XFP transceiver is installed and a 10 Gb
link has been established.
Green flashing
An XFP transceiver is installed and link
activity is occurring.
XFP
Green
An XFP transceiver is installed and enabled.
No XFP is installed if this light is off.
Amber
An XFP transceiver is installed but not
operating.
Amber flashing
The installed XFP transceiver has a
transmission fault.
A A
XFP
XFP
L/A
L/A
LINK
ACT
ENABLED
DISABLED
FAULT
AT
-A
6
0
