Hardware Reference
35
C613-03059-00 REV F
The DIMM slot’s location is shown in the following figure.
8.
Align and insert the new DIMM.
Holding a DIMM at an angle of about 30 degrees from horizontal, align the
notches on its connector strips with the notches on the empty DIMM slot,
as shown in the following figure.
Insert the DIMM into the DIMM slot, sliding it along the two DIMM
guides until the retaining latches automatically click into place. The latches
should hold the DIMM firmly in place.
Testing DIMM
The switch is unlikely to boot unless the DIMM is correctly installed. If the
switch does boot but you suspect the DIMM is malfunctioning, enter the
command:
show system
CAM mounts
Switch chip
CAM slot
Battery
Compact Flash
DIMM slot
CPU
Ports
Correct CAM
orientation
Chamfers
DIMM
DIMM slot
Ports
CAM slot
