Allied Telesis AT-8518, Installation Manual

Page: 35 / 43

B-1
Appendix B
AT-9108, AT-8518, AT-8525 and
AT-8550 Technical Specifications
Physical Dimensions Height: 3.5 inches x Width: 17.32 inches x Depth: 17.32 inches
Weight: 10 kg
Environmental Requirements
Operating Temperature 0 to 40° C
Storage Temperature -10 to 70 ° C
Operating Humidity
Standards 10% to 95% relative humidity, noncondensing
EN60068 (IEC68)
Safety
Agency Certifications UL 1950 3rd Edition, listed
cUL listed to CSA 22.2#950
TUV GS mark & GOST safety approval to the following EN standards:
EN60960:1992/A3:1995 plus ZB/ZC Deviations
EN60825-1
Electromagnetic Compatibility
FCC part 15 Class A
CSA C108.8-M11983 (A)
VCCI Class 2
EN55022 Class B
EN50082 -1 (1997)
C-Tick mark to AS/NZS 3548:1995
Note: The products that have the RJ45 ports comply with EN55022 Class B when used with shielded UTP cable.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved by the manufacturer or the FCC, can void your right to operate
this equipment.
Canadian Department of Communications.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.