Allied Telesis AT-8100L/8POE, User Manual, Page: 43 / 330

AT-8100 Series Version 2.2.5.0 Web Interface User’s Guide
43
Note
The switch does not set daylight saving time (DST) automatically. If
the switch is in a locale that uses DST, you must remember to
enable this in March when DST begins and disable it in October
when DST ends. If the switch is in a locale that does not use DST,
this option should be set to disabled all the time.
7. Click Apply .
If you enabled the SNTP client, the switch immediately polls the SNTP
or SNTP server for the current date and time. (When SNTP is enabled,
the switch automatically polls the server whenever a change is made
to any of the fields on this page.)
8. Click SAVE to save your changes to the startup configuration file.
Setting System
Time Manually
To set the system time manually, do the following:
1. Hover the cursor over the System tab.
2. From the System tab, hover over System Settings .
The System Settings Tab is displayed in Figure 9 on page 41.
3. Move the cursor to the right and click Time .
The System Time Settings page is displayed. See Figure 10 on page
41.
4. You have two ways to set the date and time in the Date & Time field.
Use either Step 5 or Step 6.
5. Type in the time and date in the following format:
yyyy-dd-mm hh:mm:ss
6. Select the calendar icon next to the Date & Time field.
The Calendar page is displayed. See Figure 12 on page 44.