Allied Telesis AT-8100L/8POE, User Manual

Page: 311 / 330

AT-8100 Series Version 2.2.5.0 Web Interface User’s Guide
311
Displaying Location Entries
To display the LLDP Civic, Coordinate, and ELIN locations, use the
following procedures:

“Displaying Civic Locations” on page 311

“Displaying Coordinate Locations” on page 312

“Displaying ELIN Locations” on page 313
For information about creating LLDP locations, see “Enabling and
Configuring LLDP on the Switch” on page 284.
Displaying Civic
Locations
To display a Civic Location, do the following:
1. Hover the cursor over the Discovery & Monitoring tab.
The Discovery & Monitoring tab is displayed. See Figure 122 on
page 284.
2. From the Discovery & Monitoring tab, hover over LLDP .
The LLDP tab appears on the right.
3. From the LLDP tab, hover over Locations .
The Locations tab is displayed. See Figure 129 on page 295.
4. From the Locations tab, move the cursor to the right and select Civic .
The LLDP Civic Location page is displayed. See Figure 131 on page
296.
The following fields are displayed:

ID

Country

State

County

City

Division

Neighborhood

Street Group

Leading Street Direction

Trailing Street Suffix

Street Suffix