Allied Telesis AT-8100L/8POE, User Manual

Page: 219 / 330

AT-8100 Series Version 2.2.5.0 Web Interface User’s Guide
219
Adding an IPv4 Address
To assign an IPv4 address, do the following:
1. Hover the cursor over the Layer 3 tab.
The Layer 3 tab is displayed. See Figure 83 on page 218.
2. From the Layer 3 tab drop-down menu, select IPv4 Interfaces .
A list of IPv4 interfaces is displayed. See Figure 84 on page 218.
3. Click Add .
The IP Address Configuration Page is displayed. See Figure 85.
Figure 85. IP Address Configuration Page
4. Enter the following fields:

IP Address — Enter the IP address that you want to add.

Subnet Mask — Enter the subnet mask of the IPv4 address in
quad-dotted decimal representation, for example, 255.255.255.0.

VLAN — Select the VLAN ID that you want to assign the IPv4
address to.
5. Click Add .
6. Click SAVE to save your changes to the startup configuration file.