Allied Telesis AT-8100L/8POE, User Manual

Page: 198 / 330

Chapter 17: RADIUS and Clients
198
authentication is attempted using the password specified using
the ENABLE PASSWORD command in the CLI.
Disabled : The servers do not use its enable
password. Authentication is attempted using the password
specified using the ENABLE PASSWORD command in the
CLI.

AAA Accounting — Select a accounting setting.
Choose from the following:
Start-Stop : A start accounting message is sent at the
beginning of a session, and a stop accounting message is sent
at the end of the session.
Stop-Only : A stop accounting message is sent at the end of
the session.
None: Sending accounting messages is disabled.
5. Click Apply .
The Active Authentication Server field shown on the upper middle of
the page indicates “.”
6. Click SAVE to save your changes to the startup configuration file.
Adding a
Server
To add a server, do the following:
1. Click Add at the bottom of the page.
The Server Add page is displayed. See Figure 74.
Figure 74. Server Add Page