manualshive.com logo in svg

Allied Telesis AT-2711FX/LC, Installation And User Manual, Page: 93 / 136

Share
Download
Allied Telesis AT-2711FX/LC Installation And User Manual Download Page 93

AT-2711 Series Fast Ethernet Adapter Installation Guide

93

Large Send Offload v2 (IPv4)

The Large Send Offload v2 (IPv4) feature allows you to control the load of 
sending out large packets. When this feature is enabled, the AT-2711 
series adapter segments large packets for IPv4 traffic and reduces the 
CPU load.

This feature, which supports large packets up to 256kb, overrides the 
Large Send Offload (IPv4) feature if both features are enabled. 

To enable or disable the Large Send Offload v2 (IPv4) feature, do the 
following:

1. Access the Advanced Properties.

See “Accessing Advanced Properties” on page 76. 

2. Select 

Large Send Offload v2 (IPv4) 

in the Property box.

The Large Send Offload v2 (IPv4) page is displayed as shown in 
Figure 50.

Figure 50. Large Send Offload v2 (IPv4) Page

Summary of Contents for AT-2711FX/LC









































































































































Reviews:

No comments