Allied Telesis AR100 series, User Manual, Page: 17 / 128

Getting Connected 3-17
Figure 3-5: Choosing an IP Address dialog
An “Initialising...” message shows under the IP Address title bar while the
wizard chooses a free IP address for the router. The IP address replaces this
when it is assigned.
4. Once an IP address shows beside the router’s serial number, click Next . The
next dialog to open is either the “Gateway Not Set dialog” on page 17, the
“Gateway Already Set dialog” on page 18 or the “Domain Name Server
dialog” on page 18.
Figure 3-6: Gateway Not Set dialog
If you see this dialog box, then you probably want the PC to use the AR100
series router as its gateway. If there is another device connected to your PC
that you want to use as its gateway, then choose
No . You may need to set the
other device as the PC’s gateway. If you are unsure, contact your network
administrator or ISP.
5. Select whether or not to use the AR100 series router as the PC’s gateway,
and click
Next . The “Domain Name Server dialog” on page 18 opens.