96
AR Router
C613-03031-01 REV E
Figure 58: Example output from the SHOW SYSTEM command for an AR720 router with an AT-AR011 V2
ECMAC installed.
Next, check the MAC’s status using the command:
SHOW LOG
to display a log of MAC events. A typical display is shown in Figure 59 on page
96.
Figure 59: Example output from the SHOW LOG command for an AR720 router with an AT-AR011 V2 ECMAC
card installed.
Router System Status Time 06:58:43 Date 15-Jun-2001.
Board ID Bay Board Name Rev Serial number
--------------------------------------------------------------------------------
Base 62 AR720 M1-0 40272628
PIC 75 0 AT-AR020-00 PIC E1/T1 PRI M1-0 42189364
MAC 155 AR011 ECMAC v2 M2-0 33636408
--------------------------------------------------------------------------------
Memory - DRAM : 16384 kB FLASH : 4096 kB
--------------------------------------------------------------------------------
SysDescription
CentreCOM AR720 version 2.2.2-00 18-May-2001
SysContact
SysLocation
SysName
SysDistName
SysUpTime
1482 ( 00:00:14 )
Software Version: 2.2.2-00 18-May-2001
Release Version : 2.2.2-00 18-May-2001
Release built : Jun 6 2001 at 00:54:54
Patch Installed : NONE
Territory : japan
Help File : help.hlp
Boot configuration file: mike.cfg (exists)
Current configuration: mike.cfg
Security Mode : Disabled
Patch files
Name Device Size Version
--------------------------------------------
52203.paz flash 8428 2.0-1
52203pac.paz flash 12988 2.0-1
--------------------------------------------
Date/Time S Mod Type SType Message
-------------------------------------------------------------------------------
15 06:58:28 4 ENCO ENCO MAC 7711 Found. Initialisation started
15 06:58:28 4 ENCO ENCO MAC 7711 Initialisation Successful
15 06:58:28 7 SYS REST NORM Router startup, ver 2.2.2-00, 18-May-2001, Clock
Log: 12:52:42 on 08-Jun-2001
15 06:58:28 6 PRI PINT WARN pri<0>: interface reset
15 06:58:31 6 PRI PINT UP pri<0>: Interface is now operational
-------------------------------------------------------------------------------