Allied Telesis ANC10 Series, Installation And User Manual

Page: 76 / 124

Chapter 4: Modifying Advanced Properties
76
Network Direct Functionality
The Network Direct Functionality property enables or disables the Remote
Direct Memory Access (RDMA) feature.
To enable or disable the Network Direct Functionality feature, do the
following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 54.
2. Select Network Direct Functionality in the Property box.
The Maximum Network Direct Functionality window is displayed as
shown in Figure 38.
Figure 38. Network Direct Functionality Window
3. Select one of the following options:

Enabled — Enables the RDMA feature.

Disabled — Disables the RDMA feature. This is the default
setting.
4. Click OK .