
GS980M Series Installation Guide
33
USB Port
You can use the USB port on the management panel for the following
functions:
Store configuration files on flash drives.
Restore configuration files to switches whose settings have been
lost or corrupted.
Configure replacement units by downloading configuration files
from a flash drive.
Update the AlliedWare Plus management software.
The port is USB2.0 compatible.
USB Port LED
The USB port has one LED, shown in Figure 9.
Figure 9. USB Port and LED
The states of the LEDs are described in Table 2.
Table 7. USB LED
State
Description
Off
The USB slot is empty.
Solid green
A USB drive is inserted in the slot.
Flashing green
The switch is writing data to or reading
data from the USB drive.
Flashing amber
The switch is experiencing problems
writing data to or reading data from the
USB drive.
USB Port LED
USB Port
Summary of Contents for AlliedWare Plus AT-GS980M/52
