19
Power Operation
BRAKE-ON
position is a neutral position. Neither clutch
is applied. The brake is fully applied.
LINE-IN
position applies the
LINE-IN
clutch and releases
the brake. The winch will wind the wire rope at a speed
controlled by the PTO speed of the tractor.
LINE-OUT
position applies the
LINE-OUT
clutch and
releases the brake. The winch will unwind the wire rope
at a speed controlled by the PTO speed of the tractor and
the weight of the load.
BRAKE-OFF
position is a detent position. The clutches
are released and the oil pressure has released the brake.
This position will permit the wire rope to unwind from the
winch against the friction of the clutches, brake, and gear
train as the tractor moves away from the load.
Note: The solid dots indicate the positions of the control levers.
The hatched dots indicate the positions of the FREESPOOL control lever.
Operation, Power Controls
Summary of Contents for W6G
