• Adjustment to accommodate the knee contracture angle. Loosen the Allen bolt on both sides
of the swinging footplate, ensuring the client is well supported. Adjust the angle as necessary
and retighten. Pics two and three show prone and supine configuration.
•
To set the angle to accommodate plantar-flexion or
dorsi-flexion , loosen the Allen key located by the knee
post, to the inside of the footplate. Place in the required
position, then retighten. See image on left.
• To adjust the height and angle of the lateral supports,
loosen the Allen bolt, adjust to the required width,
height and angle and retighten.
• If you are setting up the Mygo Stander in supine, you
will have a shoulder support. To adjust the angle of the
shoulder support laterals, loosen the Allen bolt, move
laterals to the required angle and retighten.
