Allice Messtechnik R&S ZND, User Manual, Page: 575 / 1252

GUI reference
R&S
®
ZND
575 User Manual 1173.9557.02 ─ 61
Background information
Refer to:
●
Chapter 4.7.20, "External switch matrices" , on page 220
5.17.5.1 Controls on the External Ports tab
The buttons in the "External Ports" panel open the following dialogs:
●
"Switch Matrix...", see Chapter 5.17.5.2, "External Matrices dialog" , on page 575
●
"RF Connections...", see Chapter 5.17.5.4, "Switch Matrix RF Connections dialog" ,
on page 580
"RF Connections" is enabled if at least one switch matrix is configured.
Optimization
Allows you to select between different switch matrix routing optimizations:
●
"Speed" – switch as little as possible
●
"Precision" – always use the best possible route in terms of quality ("priority")
See Chapter 4.7.20.4, "Multiple paths: precision vs. speed" , on page 223 for back-
ground information.
The selection is only enabled, if at least one of the connected switch matrices has mul-
tiple routes with non-identical priorities.
5.17.5.2 External Matrices dialog
The "External Matrices" dialog allows you to discover and register external switch
matrices.
Access: SYSTEM – [SETUP] > "External Ports" > "Switch Matrix..."
Background information
Refer to section Chapter 4.7.20, "External switch matrices" , on page 220.
Setup softtool
www.allice.de Allice Messtechnik GmbH