© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
11
802702
IMPORTANT: Hoses and other natural rubber
parts deteriorate after extended use. Hoses may
develop cracks, blisters or material wear from the
temperature and constant high pressure they are
subject to.
All hoses should be checked on a monthly basis for
any visible signs of deterioration. Any hose showing
the signs of deterioration listed above should be
replaced immediately. All hoses should be replaced
every five years.
IMPORTANT: Turn off water supply faucets after
checkout and demonstration. Turn off water supply
whenever there will be an extended period of non-
use.
NOTE: Longer fill hoses are available (as optional
equipment at extra cost) if the hoses (supplied with
the washer) are not long enough for the installation.
Order hoses as follows:
No. 20617 Fill Hose (8 feet) (2.44 m)
No. 20618 Fill Hose (10 feet) (3.05 m)
Risers
Risers (or air cushions) may have to be installed if the
pipes knock or pound when flow of water stops. The
risers are more efficient when installed as close as
possible to the water supply faucets (refer to
).
Figure 4
TLW1976N
1
Water Faucet
2
Fill Hose
3
Plain Rubber Washer
4
Hose Coupling
5
Filter Screens
Figure 2
SWD631N
1
Water Faucets
2
Cold Water Connection
3
Hot Water Connection
4
Water Fill Hoses
Figure 3
HOT
COLD
3
1
5
2
4
SWD631N
1
2
4
WATER
MIXING VALVE
3
W005I
1
Water Supply Faucets
2
Risers (Air Cushions)
W005I
2
1
