Dew Point Sensors
–
Mini
User Manual v1.1
www.compressedairalliance.com
13
Step 3
–
Attach dew point sensor to connection point
The dew point sensor’s measurement chamber comes with a nitto fitting. This can
be removed and the chamber connected directly to a valve with a male BSP fitting, if
required.
•
Screw the sensor into the measurement chamber
•
Screw the measurement chamber into the connection point and tighten with a
spanner
(eg valve, nipple or nozzle)
o
Compressed Air Alliance recommends that our dew point sensors are
installed via a measurement chamber
o
A reducing bush may be needed if connecting the measurement chamber
to a large ball valve or nipple
o
Fix measurement chamber firmly to prevent loosing or shaking
o
Use thread tap or sealant, where required
•
Open the valve
Measurement Chamber
Dew Point Sensor
Nitto fitting can be
removed, if needed
Bleed Screw
M8 Connector
Dew Point Sensor
Ball Valve
(optional)
