© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
33
512691R4
Step 6: Start Dryer
Nonmetered Models
Rotate timer knob to desired time setting (up to 60
minutes). Press the PUSH-TO-START button.
IN USE
light will come on (indicating start of cycle).
Figure 37
Coin Slide Models
Place coin(s) in slide and carefully push in as far as
possible and then pull slide out as far as possible. After
IN USE
light comes on (indicating start of cycle),
press the PUSH-TO-START button.
Remove knits when slightly damp because overdrying
may cause shrinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor
overload protector may have cycled. Refer to
Maintenance
section.
NOTE: This machine includes an extended tumble
feature. Starting 20 minutes after a cycle ends, the
cylinder will tumble for two minutes every hour
without heat, up to 18 hours or until door is
opened.
IMPORTANT: The final part of dryer cycle occurs
without heat (cool down cycle) to ensure that items
in dryer are left at a temperature that ensures that
the items will not be damaged.
DRY2101N
D363I
Figure 38
To prevent the risk of fire, never stop a
dryer before the end of the drying cycle
unless all items are quickly removed and
spread out so that the heat is dissipated.
W756
WARNING
