Collecting Audit Information
This feature allows the owner to retrieve audit information stored
in the washer by pressing a sequence of pads on the control.
How to Enter Audit Feature
There are two methods the owner can use to enter the Audit Fea-
ture.
Entering the Audit Feature by Manual
Mode
1. Control must be in Manual Mode. Refer to
2. Press the NORMAL 40 (
∧
) or the DELICATES COLD (
∨
)
keypad to scroll through the programmable options until
AU-
dit
appears in the display.
3. Press the START keypad and
CyCLES
will appear in the dis-
play.
Entering the Audit Feature with the
Coin Vault Open
1. Open coin vault. Make sure service door is closed.
2. Press the START (enter) keypad.
How to Read Audit Data
1. Press the NORMAL 40 (
∧
) or the DELICATES COLD (
∨
)
keypad to scroll through the programmable options. Refer to
2. When the desired option appears in the display press the
START (enter) keypad. The current value will appear in the
display.
3. Press the DELICATES 30 keypad. The display will return to
the audit option list.
Programmable Options
CyCLES
Total Number of Machine
Cycles
Coin 1
Total Number of Coins #1
Coin 2
Total Number of Coins #2
PULSE
Total Number of Start Pulses
rAPCyC
Total Number of Rapid Ad-
vance Cycles
rUnHrS
Total Number of Run Hours
Table 26
continues...
rCoin1
Resettable Coin #1 Count
rCoin2
Resettable Coin #2 Count
rCyCLE
Resettable machine Cycle
Count
Table 26
How to Exit Audit Feature
1. Press the DELICATES 30 (<) keypad until the control returns
to Ready Mode.
2. To exit Audit Feature when using Coin Vault Open method,
owner must close coin vault. The control will then return to
Ready Mode.
Collecting Audit Information
©
Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
95
Part No. 805405ENR5
Summary of Contents for BT3JGASG403UW01
Page 2: ......
