ALLIANCE 815, Owner'S Manual

Page: 6 / 21

6
Unpacking and Moving Instructions
No Assembly Required!
Alliance treadmills are shipped in one piece and fully assembled. After opening the box, remove
any packing materials from the treadmill. Do not throw away any packing materials until the unit
is working properly. The treadmill box contains a package that includes the Owners Manual, a
RED SAFETY KEY, and a belt adjustment tool. The 835HR will also contain the heart rate chest
strap. The treadmill will not operate without the Safety Key.
Moving
Place the base on a clean, level surface. Make sure the electrical cord will easily reach an
electrical outlet. CAUTION ! TO AVOID THE RISK OF INJURY, NEVER ATTEMPT TO MOVE
THE TREADMILL WHILE IT IS IN THE UNFOLDED OPERATING POSITON. TO REDUCE THE
POSSIBILITY OF INJURY WHILE LIFTING, BEND YOUR LEGS AND KEEP YOUR BACK
STRAIGHT. AS YOU RAISE THE TREADMILL, LIFT USING YOUR LEGS, NOT YOUR BACK.
IN ORDER TO RAISE OR LOWER THE TREADMILL SAFELY, YOU MUST BE ABLE TO LIFT
45 POUNDS (20KG). IT IS SUGGESTED YOU ALWAYS USE THE AID OF A SECOND
PERSON WHEN MOVING THE TREADMILL.
With the treadmill in the folded locked position (safety latch is engaged), grasp the handrails and
place one foot on base as shown in the illustration below. Next, with a firm grasp on handrails,
place one foot on the center of the base crossbar and carefully tilt the treadmill back until it rolls
freely on the wheels. Using extreme caution, move the treadmill to the desired location. To set
the treadmill down, place one foot on the center of the base crossbar and carefully lower treadmill
onto base in resting position. Do not attempt to move the treadmill over an uneven or rough
surface.