IO Board Located on Front Panel - SoapLink
Figure 37
Chemical Injection Supply System
WARNING
Wear eye and hand protection when handling chemi-
cals; always avoid direct contact with raw chemicals.
Read the manufacturer’s directions for accidental
contact before handling chemicals. Ensure an eye-
rinse facility and an emergency shower are within
easy reach. Check at regular intervals for chemical
leaks.
C365
Undiluted chemical dripping can damage the washer extractor.
Therefore, all chemical supply dispenser pumps should be moun-
ted below the washer extractor’s injection point. All dispenser
tubing should also run below the injection point. Loops do not
prevent drips if these instructions are not followed. Failure to fol-
low these instructions could damage the machine and void the
warranty.
shows a typical chemical injection supply
system.
Chemical Injection Supply System
CZW32NA
1
2
3
1.
Injection Point
2.
Chemical Dispenser Pump Outlet
3.
PVC Pipe
Figure 38
Installation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
49
Part No. D2601EN
Summary of Contents for UY350 PROFORM TOUCH
Page 2: ......
