background image

led and connected to a protective earth/ground in accordance with
all local codes and ordinances.

WARNING

Improper connection of the equipment earth/ground
conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if
you are in doubt as to whether the unit is properly
connected to a protective earth/ground.

W893

• DO NOT modify the plug provided with the unit – if it will

not fit the outlet, have a proper outlet installed by a qualified
electrician.

• If the laundry room’s electrical supply does not meet the

above specifications and/or if you are not sure the laundry
room has an effective earth/ground, have a qualified electri-
cian or your local electrical utility company check it and cor-
rect any problems.

WARNING

This unit is equipped with a three-prong (earth/
ground) plug for your protection against shock haz-
ard and should be plugged directly into a protective
earth/ ground three-prong receptacle. Do not cut or
remove the earth/ground prong from this plug.

W823

 Check Lid Switch

Washer should stop filling, agitating, and spinning when lid is
opened.

W376I_SVG

Figure 12

 Check Installation

1.   Refer to Installer Checklist on the back cover of this manual

and make sure that washer is installed correctly.

2.   Run washer through one complete cycle to make sure it is op-

erating properly.

Installation

©

 Copyright, Alliance Laundry Systems LLC -

 DO NOT COPY or TRANSMIT

  11

  Part No. 204871ENR1

Summary of Contents for TC5003WN













Reviews: