background image

Standard 120 Volt, 60 Hertz 3-Wire Effective Earth/
Ground Circuit

TLW2287N_SVG

6

8

7

2

1

3

5

4

1.  

L1

2.  

Earth/Ground

3.  

Neutral Side

4.  

Round Earth/Ground Prong

5.  

Neutral

6.  

0 V.A.C.

7.  

120 ± 12 V.A.C.

8.  

120 ± 12 V.A.C.

Figure 13

WARNING

To reduce the risk of an electric shock or fire, DO
NOT use an extension cord or an adapter to connect
the washer to the electric power source.

W082

 Earth/Ground Instructions

This appliance must be properly connected to protective earth/
ground. In the event of malfunction or breakdown, the earth/
ground will reduce the risk of electric shock by providing a path
of least resistance for electric current.

The appliance is equipped with a cord having an equipment earth/
ground conductor and a three-prong earth/ground plug. The plug
must be plugged into an appropriate outlet that is properly instal-

led and connected to a protective earth/ground in accordance with
all local codes and ordinances.

WARNING

Improper connection of the equipment earth/ground
conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if
you are in doubt as to whether the unit is properly
connected to a protective earth/ground.

W893

• DO NOT modify the plug provided with the unit – if it will

not fit the outlet, have a proper outlet installed by a qualified
electrician.

• If the laundry room’s electrical supply does not meet the

above specifications and/or if you are not sure the laundry
room has an effective earth/ground, have a qualified electri-
cian or your local electrical utility company check it and cor-
rect any problems.

WARNING

This unit is equipped with a three-prong (earth/
ground) plug for your protection against shock haz-
ard and should be plugged directly into a protective
earth/ ground three-prong receptacle. Do not cut or
remove the earth/ground prong from this plug.

W823

 Check Installation

1.   Refer to Installer Checklist on the back cover of this manual

and make sure that unit is installed correctly.

2.   Run washer with a test load to make sure it is operating prop-

erly and properly leveled.
a.   Put about six pounds of laundry (four bath towels and

three jeans) into washer.

b.   Close door.
c.   Select Spin cycle and press Start.
d.   When washer spins at high speed, verify that it is stable.
e.   If it is not, after cycle is complete, refer to Position and

Level the Washer to readjust leveling legs.

Installation

©

 Copyright, Alliance Laundry Systems LLC -

 DO NOT COPY or TRANSMIT

  11

  Part No. 806989ENR1

Summary of Contents for Speed Queen FR7002WN













Reviews: