Alliance Laundry Systems PD3JGBGS403UG01, Programming

Page: 13 / 40

Opening the Service Door
Stacked Washers and Dryers, Stacked
Dryers, Front Control Dryers, and Coin
Rear Control Dryers
Models through Serial No. 1810000001
Manual programming requires the user to open and close the
service door. Opening and closing the service door trips a switch
allowing access to various programming options, diagnostics, and
audit capabilities. On coin models, the coin vault switch must be
closed to enter Manual Mode.
Models starting Serial No. 1810000001
Manual programming requires the user to unplug the bullet con-
nector located between the “white/black” and “red/blue” wires.
Reconnect the connector for normal operation.
After opening and closing the service door or unplugging the bul-
let connector, the programmer has 4.25 minutes to begin pro-
gramming.
Refer to Figure 2 for locating the service door.
W521I_SVG
1
DRY579R_SVG
1
DOOR
LOCKED
SPIN RINSE WASH INSERT
COIN / CARD
505617
DRY578R_SVG
1
3
2
1
OPERATING INSTRUCTIONS
Select Wash Temperature
HOT, WARM, COLD.
Select Fabric Type
NORMAL, PERM PRESS, DELICATE.
Load Supply Dispenser (See Instructions Below).
Load Clothes.
Insert Coin(s) / Card.
To Start Washer-Close Door and Push Start.
1.
2.
3.
4.
5.
6.
Open Dispenser Door.
Load Supplies in Proper
Compartment (as Indicated).
Close Dispenser Door.
1.
2.
3.
Detergent
Liquid Bleach
Fabric Softener 1.
2.
3.
DISPENSER INSTRUCTIONS
685942
DRY580R_SVG
INSER T
COIN / CARD
DOOR
LOCKED
WASH RINSE SPIN
1
1. Service Door
Figure 2
Opening the Service Door
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
13 Part No. D515810ENR3