Alliance Laundry Systems HTEB17*J99L1, Installation And Operation Manual, Page: 52 / 136

Operation
800534
50 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Step 5: Set Fabric Selector
Select NORMAL (High Temp), PERM PRESS (Med
Temp), DELICATES (Low Temp) or TUMBLE (No
Heat) by pushing touchpad. Light indicates selection.
NOTE: Always follow manufacturer’s care label
instructions.
Figure 64
Step 6: Insert Coin(s) or Card
To Insert Money
Insert coin(s) in coin slot. Check pricing as seen on
digital display.
Figure 65
To Insert Card
Insert card into opening. Follow directions on display.
DO NOT REMOVE THE CARD UNTIL DISPLAY
READS “Remove Card”.
Figure 66
If Additional Time Feature is turned on, additional
dryer time may be purchased at cycle start or while
dryer is running.
Remove knits when slightly damp because overdrying
may cause shrinkage. Do not tumble dry knit woolens.
Step 7: Start Dryer
To start dryer, push START pad.
To stop dryer at any time, open the door. To restart the
dryer, close door and push
START pad.
Cycle is completed when time remaining reaches
00 minutes.
Figure 67
H196
W387I
H196I
M330I
H197I
M330I
H197I