manualshive.com logo in svg

Alliance Laundry Systems DRY725C, User Manual

Share
Download
Alliance Laundry Systems DRY725C User Manual Download Page 20

Troubleshooting

Try these troubleshooting tips before making a service call. They
may save you time and money.

Dryer Symptom

Possible Cause/Solution

Dryer won’t start

• For dryers equipped with a power cord, make sure the power

cord is plugged all the way into the electrical outlet.

• Make sure loading door is closed.
• Push timer knob in to start dryer.
• Make sure the laundry room fuse(s) isn’t blown or loose, or cir-

cuit breakers aren’t open.

• The dryer itself does not have an electrical fuse. An electric

dryer has an electrical circuit with two fuses.

• Check if motor overload protector has cycled. Wait 10 minutes

and try again.

Dryer won’t heat

• Make sure timer is not in COOL DOWN or COOL TUMBLE set-

tings or that Fabric Selector is not set at NO HEAT.

• Electric dryers only – Some homes may have two fuses or cir-

cuit breakers for an electric dryer; both fuses or circuit break-
ers should be checked. Make sure the laundry room fuse(s) isn’t
blown or loose, or that the circuit breakers aren’t open.

• The dryer itself does not have an electrical fuse. An electric

dryer has an electrical circuit with two fuses.

• Gas dryer only – Make sure equipment and main gas line valve is

turned on.

• Check exhaust duct to outside to see if it is kinked, blocked or

needs cleaning.

• Check weather hood to make sure flapper moves freely, has not

been pushed in or has not been blocked.

Dryer doesn’t dry clothes satisfactorily

• Check exhaust duct to outside to see if it is kinked, blocked or

needs cleaning.

• Check weather hood to make sure flapper moves freely, has not

been pushed in or has not been blocked.

• Automatic cycle – Adjust to MORE or LESS DRY setting.
• Timed cycle - Allow more or less time.
• Clean the lint filter.
• Make sure the load isn’t too small. Small loads may not tumble

properly or dry evenly.

• Check load being dried. Heavy items dried with lightweight

items will not dry as quickly as the rest of the load.

• Refer to Sort section for proper sorting information.

Dryer is noisy

• Check dryer for foreign objects (nails, coins, bobby pins, metal,

plastic toys, etc.). Remove items from dryer.

• Make sure dryer is level. Uneven leveling can cause vibration.
• Normal operating sounds include the tick of timer advancing,

heat source going on and off, and humming of air moving
through the dryer and exhaust system.

Troubleshooting

  Part No. 513124ENR6

©

 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT

  20

Summary of Contents for DRY725C

























Reviews:

No comments

Brands by name

Popular brands

Load more brands