Cygnus Operation
STANDARD Control
Operational Keypad
CFD813N_SVG
5
4
3
2
1
1.
Cycle Step LEDs
2.
Display
3.
Cycle Number Keypads
4.
Start/Stop Keypad
5.
ECO Wash Keypad
Figure 2
Operating Instructions – STANDARD Control
1.
Open the door by pulling the door handle toward you.
2.
Load the machine. Refer to
Load the washer-extractor to full capacity whenever possible, but
do not exceed the rated dry-weight capacity of the machine if the
fabric to be washed is dense, closely woven or heavily soiled.
Overloading the machine can result in an inferior wash. The op-
erator may need to experiment to determine the optimum load
size based on the fabric content, soil content and level of cleanli-
ness required.
Do not underload the machine. Underloading can result in out-of-
balance conditions and may lead to premature bearing and seal
failure.
CHM2273N_SVG
Figure 3
3.
Close the door by pushing the door handle toward the ma-
chine. Refer to
Cygnus Operation
D1528ENR3
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
9
Summary of Contents for D1528ENR3
Page 2: ......
