Display Identification
12
6
9
3
CFD596N_SVG
Hot with P rewash 60°C
7.0cm
17°C
0 47
1h 10
min
6
7
8
1
2
3
4
5
1.
Button bar
2.
Time left within this specific cycle step
3.
Component bar
4.
Phase bar
5.
Title bar
6.
Total time for chosen program
7.
Current Water Temperature
8.
Water level
Figure 12
Operating Instructions – PRO Control
1.
Open the door by pulling the door handle toward you.
2.
Load the machine. Refer to
.
Load the washer-extractor to full capacity whenever possible, but
do not exceed the rated dry-weight capacity of the machine if the
fabric to be washed is dense, closely woven or heavily soiled.
Overloading the machine can result in an inferior wash. The op-
erator may need to experiment to determine the optimum load
size based on the fabric content, soil content and level of cleanli-
ness required.
Do not underload the machine. Underloading can result in out-of-
balance conditions and may lead to premature bearing and seal
failure.
CHM2273N_SVG
Figure 13
3.
Close the door by pushing the door handle toward the ma-
chine. Refer to
.
Cygnus Operation
D1528ENR3
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
13
Summary of Contents for D1528ENR3
Page 2: ......
