Alliance Laundry Systems BWNBC2PP112TW01, Programming

Page: 18 / 28

COM1R_SVG
Figure 19
3. Press the START (enter) keypad and
AtS
will appear in the
Four-Digit Display.
4. Press the PERM PRESS/WARM (
∧
) or the DELICATES/
COLD (
∨
) keypad to scroll through the programmable options
until
CnFg
appears in the Four-Digit Display.
DRY563R_SVG
Figure 20
5. When
CnFg
appears in the Four-Digit Display, press the
START (enter) keypad. A number will appear in the Four-
Digit Display. This number corresponds to the current config-
uration value.
6. Press the PERM PRESS/WARM (
∧
) or the DELICATES/
COLD (
∨
) keypad to increase or decrease the current number
to the desired number selected from Table 1 .
7. Press the START (enter) keypad when the correct number ap-
pears in the Four-Digit Display. The next option,
dCyC
, will
appear in the Four-Digit Display.
NOTE: To program
dCyC
(Default Cycle), refer to that
section. To program other options, refer to the ap-
propriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option, not a val-
ue.
2. While pressing and holding the NORMAL/HOT keypad with
one hand, press the NORMAL/ WARM keypad with the other
hand. The control will revert back to the previous mode of op-
eration.
Programming Control
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
18 Part No. 202713ENR1