© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
802734
18
3. Install extension lever with rounded corner
facing away from extension bracket using bolt,
washer and nut. Refer to
Figure 22
.
4. Install extension bracket and lever assembly onto
coin slide bracket using two screws and locknuts.
Refer to
Figure 23
.
IMPORTANT: Install coin slide bracket with side
marked "A" facing up and toward extension
bracket and lever assembly. Refer to
Figure 23
.
5. Install coin slide extension assembly onto top of
coin slide using two remaining screws and
lockwashers. Refer to
Figure 24
.
6. Before installing coin slide and extension, make
sure ground wire is tucked under control shield to
provide clearance for coin slide. Refer to
Figure 25
.
Figure 22
Figure 23
TLW15
8
0K
Extension
Bracket
Bolt
Washer
Extension
Lever
Nut
Rounded
Corner
TLW1580K
Coin Slide Bracket -
Letter "A"
Extension Bracket and
Lever Assembly
TLW2155N
Figure 24
TLW2157N
Figure 25
Coin Slide Extension
Assembly
TLW2156N
Ground Wire Placement
