WARNING
@lgood
The hand dryer MUST be isolated from the power
supply du
'.
ring installation or maintenance.
Wiring instructions
Always ensure that the inst
�
llation conforms
to the current edition of
the I.E.E. wiring regulationsi BS 7671
(UK) or the appropriate standards in
I
your country. Ensure that th
�
unit is
separately fused with a suitably rated
fuse and that it is connected to the supply
with a double pole i
�
olating switch having a
contact sep,aration of
at least 3mm. Care should
�
e taken
that single insulated condu(tors cannot come
into contact with the mounting
surface.
P
lease connect the terminal block (see
illustration 1) as follows:
1. Connect the live wire (coloured red or
brown) to the terminal marked T.
2. Connect the neutral wire (coloured black
or blue) to the terminal marked 'N'.
3.
Connect the earth wire (coloured green
and yellow) to the terminal marked '-4,-'.
T
:
020
7
38
7
99
5
1
2
www
.allgood.co.uk
IMPORTANT
@lgood
After installation or servicing, units must be checked,
and only left when electrically and mechanically safe.
Mounting instructions
The Hand Dryer must be fixed to a solid supporting wall. The recommended distance
'Y'
from finished floor (FFL) level to
the bottom of the unit should be as follows:-
To ensure ease of installation and subsequent
maintenance, the horizontal distance to any
adjacent wall should not be less than 0.2
metres.
To install follow the steps on p4:
T
:
020
7
38
7
99
5
1
3
www
.allgood.co.uk
Fixing Instructions: 2461N Surface mounted hand dryer
FI2461N
Issue 03-08/22
Fixing Instructions: 2461N Surface mounted hand dryer
FI2461N
Issue 03-08/22
•
Male washrooms
1168mm
•
Female washrooms
1118mm
•
Disabled washrooms 1016mm
•
Children aged 14-17 1118mm
•
Children aged 11-13 1016mm
•
Children aged 8-10
914mm
•
Children aged 4-7
672mm
1.
