manualshive.com logo in svg

Allflex RS340, User Manual

Share
Download
Allflex RS340 User Manual Download Page 23

23

 

Bluetooth® – Known Successful Methods 

 
There are 5 scenarios to correctly implement Bluetooth®. These are: 

1.

 

RS340+CM301 to a Bluetooth® adapter connected to a scale head. 

2.

 

RS340+CM301 to a Bluetooth® adapter connected to a Computer Serial Port. 

3.

 

RS340+CM301 to a Bluetooth® enabled computer. 

4.

 

RS340+CM301 (With Hardware ON/OFF switch

*

) to a Bluetooth® enabled 

PDA (Palm Top Computer/Portable Data Assistant) 

5.

 

RS340+ CM301 to a dedicated Bluetooth® device, such as printer. 

 
These options are discussed in further detail below. 
 

1.

 

RS340+CM301 to a Bluetooth® adapter connected to a scale head. 

 

This scenario requires that a process called 
“Pairing” be undertaken. This requires the 
Allflex Configurator© software to configure 
the reader to correctly link to the Bluetooth® 
module connected to the scale head. Most 
Allflex offices pre-match readers to 
Bluetooth® adapters prior to dispatch. 
 
If your RS340 and Bluetooth® adapter have 
not been set up for you, or have lost their 
pairing, Allflex Configurator© Software will 
be required to complete the Pairing Process. 

 
Depending upon the country, Allflex Configurator© Software will either be supplied 
on a specific Configurator© CD supplied with the reader, or included on other CD’s 
such as NLIS Link in Australia. Install the Configurator© Software. The scale head 
serial port must supply power on pin 9. 

                                                      

*

 Please contact your Allflex reseller for this specific Bluetooth module 

Stock Weigh 

Electronic 

Scale Head 

Bluetooth Module 

connected to serial port 

Summary of Contents for RS340













































Reviews:

No comments

Brands by name

Popular brands

Load more brands