manualshive.com logo in svg

allen TRTP75, Safety & Operation Manual, Page: 29 / 48

Share
Download
allen TRTP75 Safety & Operation Manual Download Page 29

SECTION 2

OPERATIONS

075707

Page 29

Introduction to Triple Roller Tube Paver 75

This machine is built with user safety in mind. However, it can present hazards if improperly 

operated and serviced. Follow operating instructions carefully.

If you have any questions about operating or servicing this equipment, please contact your Allen 

Engineering Dealer or AEC Customer Service at 800-643-0095 or 870-236-7751.

•  The 75 Triple Roller Tube Paver (TRTP) is a simple and economic but effective paving 

machine. This model is the smallest of the TRTP family. The 75 TRTP is the ideal machine 
for smaller paving jobs.  

•  This machine is powered by an air-cooled 22 hp Honda gasoline engine. 

•  The finishing tube has a variable speed control with forward and reverse movement. The 

maximum setting for the finishing tube is approximately 170 RPM and the maximum setting 
for the travel tubes are approximately 25 RPM.

•  This machine can be fitted with either 6” or 8” diameter tubes. The length of the tubes can 

be customized from 14’ to 24’ in 2’ increments.

Summary of Contents for TRTP75

















































Reviews:

No comments