allen TRTP150B, Operations & Parts Manual, Page: 27 / 80

TRTP150B - 09/2014
Page 27
SECTION 2
OPERATIONS
Before Starting Procedures
Before starting the machine check for the following:
1) Oil level in engine.
2) Hydraulic oil level in hydraulic tank.
3) Fuel level in fuel tank.
4) Condition of hydraulic oil and air filters.
5) Verify that daily maintenance has been performed.
6) Verify all controls are in the neutral position.
Starting Procedures
Before starting the machine, refer to pictures on Pages 28 and 29 for location and
identification of operational and visual controls pertaining to the operation of the TRTP.
1) Turn igintion switch key to the start-position, immediately release key
when engine starts. Allow engine and hydraulic components to warm up
for 5 minutes before operating machine.
Operating the starter for more than 5 seconds can damage the starter or engine. If engine fails to
start release the switch and wait 15 seconds before operating starter again.
Startup Procedures