2001 Allen Products Company Incorporated, Signal Hill, CA 90806 USA (562) 424-1100 Rev01. 112105
Figure 2A
Figure 2B
Figure 2B
Figure 3
Figure 4
Step 6. Hang Speaker from
Cross Arm:
Attach the eye of the clutch lock
of the pulley cable to the loop of
one fixed cable and one eyebolt
from the SAS-100-WM wall
mount with a 5/16” shackle.
Attach the other end of the pulley
cable to the other fixed cable and
SAS-100-WM wall mount eyebolt
with a 5/16” shackle (Figure 4).
Secure shackle pins with the
included tie wraps (Figure 5).
Step 9. Adjust Pan Angle:
Hold both ends of the cross bar
then slightly twist horizontally
(clockwise or counter clockwise)
until desired direction is achieved
(Figure 4).
Step 10. Adjust Tilt Angle:
Loosen the lock nut on the clutch lock
halfway then pull the free end of the
adjustable tilt cable up until desired tilt
angle is achieved. Tighten lock nut to
secure tilt angle. To release tilt angle,
loosen the locknut halfway and depress
plunger while supporting the weight of
the speaker (Figure 6).
A
llen Products Company Inc.
1635 E. Burnett Street
Signal Hill, CA 90755 USA
Tel: (562) 424-1100 Fax: (562) 424-
3520
Web Site: www.allenproducts.com
Figure 5
Figure 6
