INSTRUCTIONAL
OWNER’S MANUAL
p
4
WARNING!:
Check this pin periodically during and before each use to be sure that it has not become loose.
Failure to do so could result in SERIOUS INJURY to you or trailer’s occupants.
TOW ARM INSTALLATION
STEP 1:
STEP 2:
STEP 3:
Locate the hitch arm, and position on the left side of the trailer as shown. The hitch arm is held in place by a spring pin
and a quick release pin.
Depress the sping pin and insert the hitch arm into the bracket on the frame as shown to the right.
Once the spring pin locks in place in the hole in the bracket, Locate the QR pin, located on the trailer frame, then Insert the
pin through the bracket and into the hole in the tow arm. The pin should go completely through the tow arm and bracket.
Once the pin is through, flip the safety clasp over and onto the pin. Give the pin a tug to be sure it is secure.
ATTACHING THE FOUR SEASON COVER
WARNING!:
Never use the trailer without the four season cover. The front window or bug screen must be
attached to protect children from flying objects.
STEP 2:
STEP 3:
STEP 4:
STEP 5:
NOTE:
STEP 1:
Wrap the Velcro backed fixing straps and secure the cover around the frame.
Position the four-season cover over the trailer where roll-up window is
facing towards the front side of the trailer. (Fig.12).
Secure the Velcro material at the bottom front of the cover to the
matching Velcro material on the lower front fabric panel.
Connect the slide release buckles affixed to the rear corners of the cover
to the matching buckles sewn the rear side of the trailer cabin (Fig 13).
Connect the elastic cords on the rear cover to the D-Rings which are
located on the bottom cabin corners
The four-season cover is designed to keep passengers and cargo dry
and warm in inclement weather. It also protects the passengers from
flying debris. The four-season cover can be rolled up to allow for added
ventilation in hot weather. Velcro closures keep the four-season cover
in place when rolled up.
FIGURE 12.
FIGURE 13.
