6
7
SURFACE-MOUNT INSTALLATION INSTRUCTIONS
SURFACE-MOUNT INSTALLATION INSTRUCTIONS
5. Remove the paper from the preassembled adhesive
tape on each side mirror bracket (JJ), then carefully
attach side mirrors (B) to each side of cabinet (C).
Proceed to
ASSEMBLY INSTRUCTIONS
on page 9 to
complete assembly.
5
B
C
JJ
第 6 页
第 7 页
Hardware Used
4. Attach side mirror brackets (JJ) to cabinet (C)
where shown (on both sides) with short screws (AA)
and washers (EE), then snap caps (DD) to cover the
screw heads.
4
Short Screw
Snap Cap
Washer
Side Mirror Bracket
x 4
x 4
x 4
x 4
AA
DD
EE
JJ
Lowes.com/allenandroth
Lowes.com/allenandroth
JJ
EE
AA
DD
C
GG
GG
HH
HH
Hardware Used
Hardware Used
3a.
For drywall installations:
With the assistance of
another person, install the top clips (II) by inserting the
rounded ends into the rear top slot of cabinet (C).Slide
one top clip (II) to the left and one to the right, then
secure using long screws (GG) through the top clips (II)
and directly into the wall studs.
3b.
For solid wall installations:
With the assistance of
another person, install the top clips (II) by inserting the
rounded ends into the rear top slot of cabinet (C) Slide
one top clip (II) to the left and one to the right, then mark
locations with a pencil. Temporarily move top clips (II)
out of position, then use a 5/16-in. drill bit (not included)
and drill a pilot hole at marked locations. Move top clips
(II) back into position and insert wall anchors (HH) into
holes, then insert long screws (GG) through top clip (II)
and into wall anchors (HH).
3a
3b
Top Clip
Top Clip
Long Screw
Long Screw
x 2
x 2
x 2
x 2
II
II
GG
GG
II
II
C
C
Wall Anchor
x 2
HH