8
ASSEMBLY INSTRUCTIONS
1
3
2
1. Check that the ignition control knob (M) for
the gas supply system is turned to the “OFF”
position before starting any assembly.
2. Turn the firebowl (A) upside down. Unscrew and
remove the cap on the electronic igniter (B), then
place the AA battery (H ) into the battery slot.
Be sure the positive side of the battery faces
outwards. Replace the electronic igniter cap over
the battery; be sure to tighten securely.
3. Unscrew and remove the fixing nut (D) from the
threaded post, then attach the fixing plate (C) onto
the bottom of the firebowl body (A) using
4 M4x8 screws (AA). Be sure to tighten securely.
M
H
B
A
D
AA
C
A