8
&OHDQIDQKRXVLQJZLWKRQO\DVRIWEUXVKRUOLQWIUHHFORWKWRDYRLGVFUDWFKLQJWKH¿QLVK&OHDQ
blades with a lint-free cloth.
7KLVSURGXFWHPSOR\VRYHUORDGSURWHFWLRQIXVH$EORZQIXVHLQGLFDWHVDQRYHUORDGRUVKRUWFLUFXLW
situation. If the fuse blows, unplug the product from the outlet and replace the fuse as below:
1) G rab the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling
on cord.
2) Slide open fuse access cover on top of attachment plug toward blades.
3) R emove the fuse carefully.
4) R eplace fuse.
CAUTION:
5LVNRI¿UH8VHRQO\DPSYROWIXVHV
5) Slide closed the fuse access cover on top of attachment plug.
CAUTION:
5LVNRI¿UH'R127UHSODFHWKHDWWDFKPHQWSOXJDVLWFRQWDLQVDVDIHW\GHYLFH
(fuse) that should not be removed. Discard the product if the attachment plug is damaged.
IMPORTANT:
Shut off the main power supply before beginning any maintenance. Do not use
water or a damp cloth to clean the ceiling fan.
CARE AND MAINTENANCE
TROUBLESH OOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
1. Fan does not
move
1. Power is off or fuse is blown.
2. Bad wire connection.
1. Turn power on or check fuse.
2. Turn power off. Loosen canopy,
check all connections.
2. N oisy operation
1. Blades are loose.
2. Blade is crack ed.
3. N on-approved speed control.
1. Tighten all blade screws.
2. R eplace blades (call customer
service for special replacement).
3. R eplace with an approved speed
control device.
3. Excessive
wobbling
8QEDODQFHGEODGHV
2. Blades are loose.
3. Fan not securely mounted.
4. Fan too close to vaulted ceiling.
1. Switch with blade from opposite
side.
2. Tighten all blade screws.
3. Turn off power. Carefully loosen
canopy, and remount securely.
4. Lower or move fan. Extension
downrods may be offered (call
customer service).
TM
Summary of Contents for 2889551
Page 10: ......
