6
INSTALLATION INSTRUCTIONS (Continued)
9. After installation is complete, remove the aerator (9.1) from
the spout (A). Turn on the water supply. Check for leaks at all
waterway connections. If a leak occurs, gently tighten the nut
on the water connection that is leaking. Fill the sink with water
to check the drain for leaks. If water is leaking from the drain,
tighten the mounting nut on the pop-up drain assembly (D).
After the pop-up drain has been checked for leaks, empty the
sink. Run hot and cold water uninterrupted for at least one minute
to flush away any debris that could cause damage to the internal
parts.Turn off the water and reattach the aerator (9.1) onto the
spout (A).
9
REPLACING LED AERATOR WITH NON-LIGHTED AERATOR
1. Hold the end
of the spout on
the faucet body
(A) and turn the
LED aerator
(1.1) clockwise
to remove it from
the spout on the
faucet body (A).
1
2. Thread the non-
lighted aerator (F)
onto the end of the
spout on the faucet
body (A). Hand
tighten, but do not
overtighten.
2
OPERATING INSTRUCTIONS
The lever handles control the flow of hot and cold water to the faucet. Moving the handle forward
opens the cartridge and causes water to flow from the spout. Rotate the handle on the left side of the
faucet forward for hot water. Rotate the handle on the right side of the faucet forward for cold water.
The degree of handle opening determines the volume of water flow. Returning the handle to the
original position away from the spout on the faucet body stops the flow of water.
CARE AND CLEANING
Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these
will dull the finish and void your warranty.
A
9.1
A
A
F
1.1
