background image

 

ALLEN ORGAN COMPANY 

For more than sixty years--practically the entire history of electronic organs-- Allen Organ 
Company has built the finest organs that technology would allow. 

In 1939, Allen built and marketed the world’s first electronic oscillator organ.  The tone 
generators for this instrument used two hundred forty-four vacuum tubes, contained about five 
thousand components, and weighed nearly three hundred pounds.  Even with all this equipment, 
the specification included relatively few stops. 

By 1959, Allen had replaced vacuum tubes in oscillator organs with transistors.  Thousands of 
transistorized instruments were built, including some of the largest, most sophisticated oscillator 
organs ever designed. 

Only a radical technological breakthrough could improve upon the performance of Allen’s 
oscillator organs.  Such a breakthrough came in conjunction with the United States Space 
Program in the form of highly advanced digital microcircuits.  In 1971, Allen produced and sold 
the world’s first musical instrument utilizing digitally sampled voices! 

Your organ is significantly advanced since the first generation Allen digital instrument.  Organs 
with Renaissance

 technology are the product of years of advancements in digital sound and 

control techniques by Allen Organ Company.  This system represents the apex of digital 
technology applied to exacting musical tasks.  The result is a musical instrument of remarkably 
advanced tone quality and performance. 

Congratulations

 on the purchase of your new Allen Organ!  You have acquired the most 

advanced electronic organ ever built, one that harnesses a sophisticated custom computer system 
to create and control beautiful organ sound.  Familiarize yourself with the instrument by reading 
through this booklet. 

 

Contents 

I.

 

ORGAN STOPS .................................................................................................................... 1

 

II.

 

SPECIALIZED STOP CONTROLS ..................................................................................... 2

 

III.

 

EXPRESSION SHOE (Volume Control Pedal) .................................................................... 3

 

IV.

 

SETTING CAPTURE REGISTRATIONS ........................................................................... 3

 

V.

 

ARTISTIC REGISTRATION ............................................................................................... 3

 

VI.

 

TRANSPOSER ..................................................................................................................... 6

 

VII.

 

ACOUSTIC PORTRAIT™ ................................................................................................... 7

 

VIII.

 

INSTALLATION, VOICING, AND CARE OF THE ORGAN ........................................... 7

 

IX.

 

SAFETY INFORMATION ................................................................................................... 9

 

X.

 

CONSOLE CONTROLLER™ GUIDE .............................................................................. 11

 

 

Summary of Contents for Historique III






































Reviews: